Using A Control (Expression) Pedal; Using Control Pedal; Basic Midi Settings - Clavia Nord Electro 2 User Manual

NORD ELECTRO 2 V3.0x
U
SING A CONTROL
As indicated in the illustration on
can be connected to the C
pedal can be used to control either Organ Swell (the characteristic B3 volume control) or Wah-Wah mod-
ulation. Pedals like the Roland EV-5 and control/expression pedals from Proel works well with the Electro
2. Control pedals from Yamaha have different characteristics and are not suitable for use with the Electro
2. Nord Electro 2 will also send and receive Expression pedal messages via MIDI (CC# 11).
B MIDI
ASIC
If you are controlling the Nord Electro 2 from an external MIDI keyboard, the Nord Electro 2 must be set
to receive on the same MIDI channel that the external keyboard transmits on. Nord Electro 2 is monotim-
bral (or bitimbral when using the Organ
on page 22) which means it can only transmit and receive on one MIDI channel at a time.
1. Set the MIDI keyboard to transmit and receive on MIDI Channel 1. (This is the default setting
when Nord Electro 2 is shipped from factory).
2. Press the S
HIFT
tons. The D
ISPLAY
MIDI channel.
3. Scroll with the U
select MIDI Channel 1 (if it isn't already
selected).
4. Press any button (except for the S
U /D buttons) to exit.
P OWN
For information on how to set up Nord Electro 2
for use with an external sequencer, see
Nord Electro 2 with a sequencer" on page
3. Getting started: Using a control (expression) pedal
(
EXPRESSION
page 9, a regular resistive (range 10 kOhm to 50 kOhm) expression pedal
P input, using a stereo (Tip-Ring-Sleeve) cable. The connected
ONTROL EDAL
SETTINGS
section.See"Using an additional "Lower Manual" MIDI keyboard"
+ P 1 (MIDI CH) but-
ROGRAM
shows the currently selected
/D N
P OWN AVIGATOR
, S
HIFT
)
PEDAL
buttons to
or
TORE
"Using
42.
Page 15