Omniswitch 6800-24L Front Panel - Alcatel OS6850-48L Getting Started Manual

OmniSwitch 6800-24L Front Panel

Status and Slot Indicator LEDs
For detailed information on OS6800-
24L status and slot indicator LEDs,
refer to page 58.
OmniSwitch 6800-24L
TM
OK PRI
PWR BPS
FAN TMP
56 Hardware Basics
Speed 1 3 5 7 9 11
Speed 2 4 6 8 10 12
10/100Mbps and 10/100/100Mbps Ports
The OS6800-24L provides 20 fixed non combo
10/100BaseT (1–20) ports and 4 fixed 10/100/
1000BaseT combo ports (21–24). These ports are
auto-sensing and auto-MDIX and use RJ-45 connec-
tors.
Combo SFP Ports
The OS6800-24L provides four combo SFP slots for 1000Base-X high-
speed connections.
By default, when an SFP is installed in a combo port, it takes over the port
number of the corresponding RJ-45 Ethernet port. In other words, if an SFP
is installed in the slot labeled 24, Ethernet port 24 is no longer available and
cannot be used for 10/100/1000 traffic. This default setting is referred to as
"preferred fiber." Refer to "Configuring Ethernet Ports" in the Network
Configuration Guide for detailed information, including steps for configur-
ing combo port settings.
13
14
15 17 19 21 23 LINK/ACT
21
21
23
22
24
16 18 20 22 24 LINK/ACT
22
Console Port
The OS6800-24L front panel provides one
RJ-45 port for console connections. Con-
sole connections are used by network
administrators for switch management.
This female RJ-45 connector provides a
DTE console connection.
23
Console
24
October 2006