Omniswitch 6800-24 Front Panel - Alcatel OS6850-48L Getting Started Manual

OmniSwitch 6800-24 Front Panel

System Status LEDs
For detailed information on
OS6800-24 system status and
other LEDs, refer to page 58.
OmniSwitch 6800-24
TM
OK PRI
PWR BPS
FAN TMP
October 2006
Combo SFP Ports
The OS6800-24 provides four combo SFP slots for 1000Base-X high-speed connections.
By default, when an SFP is installed in a combo port, it takes over the port number of the corresponding
RJ-45 Ethernet port. In other words, if an SFP is installed in the slot labeled 24, Ethernet port 24 is no
longer available and cannot be used for 10/100/1000 traffic. This default setting is referred to as "pre-
ferred fiber." Refer to "Configuring Ethernet Ports" in the Network Configuration Guide for detailed
information, including steps for configuring combo port settings.
Speed 1 3 5 7
Speed 2 4 6 8
10/100/1000Mbps Ports
The OS6800-24 provides 20 fixed 10/100/1000BaseT
non combo ports (1–20) and 4 fixed 10/100/
1000BaseT combo ports (21–24). These ports are
auto-sensing and auto-MDIX and use RJ-45 connec-
tors.
9 11
10 12
13 15 17 19 21 23 LINK/ACT
21
23
22
14 16 18 20 22 24 LINK/ACT 24
Console Port
The OS6800-24 front panel provides one
RJ-45 port for console connections. Con-
sole connections are used by network
administrators for switch management.
This female RJ-45 connector provides a
DTE console connection.
Hardware Basics
21 23
Console
22 24
53