Canon imageCLASS MF4350D User Manual page 8

2 Set Up the Machine
3
Gently rock the toner cartridge several times to
evenly distribute the toner inside.
4
Place the toner cartridge on a flat surface and
pull the seal completely out.
Do not pull the seal out at an angle.
–
If toner is adhered on the removed seal, be careful that
your hands or clothes do not get dirty from touching the
toner.
–
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. If you do, the toner may be set permanently.
5
Hold the front side of the operation panel with
your hands.
6
6
Lift the scanning platform (A) until it is locked.
(You will hear an audible "click. " )
7
Hold the grip (A) on the right front side of the
toner cover.
8
Open the toner cover.
9
Hold the toner cartridge by its handle (A).