Canon imageCLASS MF4350D User Manual page 11

7
Load the paper into the paper cassette with the
print side up. Make sure the paper stack sits
below the small fin (A) on the side paper guide.
8
Adjust the paper guide rail to match the size of
paper.
9
Close the front panel of the paper cassette.
To load Legal-size paper, leave the front panel of paper
cassette open and adjust the paper guide rail (A) for Legal-
size paper.
10
Match up the edge of the dust cover (A) and
the edge of the paper cassette (B), and place
the cover on top of the cassette.
11
Attach the document feeder tray on the
document feeder.
–
The default paper size/type is set to <LTR> and <PLAIN
PAPER> in the setting menu. When you load other size
and/or type of paper, change the paper size/type setting
by pressing [Paper Settings]. For details, see
"Introduction of the Machine, " in the e-Manual.
–
For loading paper in the multi-purpose tray, see
"Introduction of the Machine, " in the e-Manual.
–
If a printout falls out of the output tray, extend the output
tray extension on the front side of the machine and set
the paper stopper upright.
2 Set Up the Machine
9