Connections - Brother MFC-9460CDN User Manual

Note
If you have problems receiving faxes,
reduce the ring delay setting on your
external TAD.
Telephone services and external devices

Connections

The external TAD must be plugged into the
back of the machine, into the jack labeled
EXT. Your machine cannot work properly if
you plug the TAD into a wall jack (unless you
are using Distinctive Ring).
a
Plug the telephone line cord from the
telephone wall jack into the back of the
machine, in the jack labeled LINE.
b
Plug the telephone line cord from your
external TAD into the back of the
machine, in the jack labeled EXT. (Make
sure this cord is connected to the TAD at
the TAD's telephone line jack, and not
its handset jack.)
c
Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
d
Record the outgoing message on your
external TAD.
e
Set the TAD to answer calls.
f
Set the Receive Mode to
External TAD. (See Choose the
correct Receive Mode on page 32.)
6
6
41