Wireless Configuration For Macintosh Using The Brother Installer Application (For Dcp-373Cw, Dcp-375Cw, Dcp-377Cw, Dcp-593Cw, Dcp-595Cw, Dcp-597Cw, Mfc-495Cw And Mfc-795Cw) - Brother MFC-255CW Network Manual

Wireless Configuration for Macintosh
5
using the Brother installer application
(For DCP-373CW, DCP-375CW,
DCP-377CW, DCP-593CW, DCP-595CW,
DCP-597CW, MFC-495CW and MFC-795CW)
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
• You can also setup your Brother machine using the machine's control panel which we recommend. You
can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless
network (Not available for DCP-365CN, DCP-395CN and MFC-295CN) on page 19.
• You must know your wireless network settings before you proceed with this installation.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
5
5
72