Brother MFC-255CW Network Manual page 40

Configuring your machine for a wireless network (Not available for DCP-365CN, DCP-395CN and MFC-295CN)
Configuring your machine when the SSID is not broadcast
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Infrastructure
Ad-hoc
1
TKIP is supported for WPA-PSK only.
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
Note
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using
more than one WEP KEY enter the KEY used for the first WEP KEY.
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW and
MFC-495CW
Press a or b to choose WLAN.
Press OK.
e
Press a or b to choose Setup Wizard.
Press OK.
Authentication method
Open system
Shared key
WPA/WPA2-PSK
Open system
Authentication method
WPA2-PSK
Encryption mode
WEP
NONE
WEP
AES
1
TKIP
WEP
NONE
Encryption mode
AES
Network key
—
—
Network key
12345678
31
3
3