Brother MFC-255CW Network Manual page 106

Control panel setup
IP Address
This field displays the current IP address of the machine. If you have chosen a BOOT Method of Static,
enter the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have chosen a method other than Static, the machine will attempt to determine its IP
address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW and
MFC-495CW
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose IP Address.
Press OK.
f
Enter the IP address.
Press OK.
Note
• For DCP-365CN, DCP-373CW, DCP-375CW and DCP-377CW, press a or b repeatedly to enter the first
three-digit number for the IP address. Press OK to enter the second three-digit number. Repeat this step
until you have entered the fourth three-digit number to complete the IP address. Press OK.
• For DCP-395CN, DCP-593CW, DCP-595CW and DCP-597CW, press a or b repeatedly to enter the first
three-digit number for the IP address. Press d to enter the second three-digit number. Repeat this step
until you have entered the fourth three-digit number to complete the IP address. Press OK.
g
Press Stop/Exit.
6
6
97