Motorola IDEN WIRELESS DATA SERVICES User Manual page 34

Wireless Data Services
Completing Software Installation for All Operating
Systems
There is a baud rate setting for your computer and a baud
rate setting for your phone. If you do not choose AutoDetect
and accept the default baud rate of 19200, be sure the
settings for the computer and the phone are the same. If they
are not, your computer might have a problem connecting
with the phone.
To check the baud rate on your phone, press * # 6 0 on the
keypad.
At baud rates of 115.2K and 57.6K, you must set both the
PC and your phone to Hardware Flow Control for circuit
data and packet data. Additionally, for optimum
performance, set the Advance Port Settings as follows:
WIN95/WIN98/ME:
- Use FIFO buffers (requires 16550 compatible
UART)
- Receive buffer (8) (one less than high setting)
- Transmit buffer (8) (one less than high setting)
WINNT/2000:
- FIFO Enabled
1. At the Communications Settings window, do one of the following:
• Click "Auto Detect" to have the program automatically detect the
communication port to which your phone is connected and set the
corresponding COM port button.
• Or, select a COM or USB port by clicking its selection button.
30
I M P O R T A N T