Wireless Data Services
1. At the Communications Settings window, do one of the following:
• Click "Auto Detect" to have the program automatically detect the
communication port to which your phone is connected and set the
corresponding COM port button.
• Or, select a COM or USB port by clicking its selection button.
1.
2.
3.
Make a note of the selected COM port. You will need it later
in the installation when you add the circuit-data modem.
2. Optional: If you want to change the baud rate, click the down arrow next
to 19200 and make another selection.
Be sure that "Done" appears in the Status box before you continue
3. Click "OK".
4. Click "OK" in this information window.
16
T I P