Operational Display Codes; Table 12 Operational Display Codes - Motorola HT-1000 Service Manual

Operational Display
Codes
FAILURE CODE
14-Character 6-Character
Display Display
FAIL 001 F001
FAIL 002 F002
FAIL 100 F100
FAIL 101 F101
16
During operation, the radio performs dynamic tests to determine if it
is working properly. Problems detected during these tests are presented
as error codes on the radio display. The presence of an error code
should prompt a user that a problem exists and that a service
technician should be contacted. Use Table 12 to aid in understanding
particular operational error code displays.

Table 12 Operational Display Codes

DESCRIPTION
Synthesizer out of lock
Selected Mode (Zone/Channel)
codeplug checksum error
Incompatible trunking
software and hardware
Incompatible MDC1200
software and hardware
POSSIBLE SOURCE
Bad frequency data in codeplug;
defective synthesizer
Bad codeplug data
Trunking hardware decoder disabled in
codeplug; old SLIC IC version
MDC 1200 hardware decoder disabled in
codeplug; old SLIC IC version