Operational Error Codes; Table 17. Power-Up Error Code Displays; Table 18. Operational Error Code Displays - Motorola ASTRO XTS 5000 I Basic Service Manual

Basic Troubleshooting
Error
Code
01/02 FLASH ROM Codeplug Checksum Non-Fatal Error
01/12 Security Partition Checksum Non-Fatal Error
01/20 ABACUS Tune Failure Non-Fatal Error
01/22 Tuning Codeplug Checksum Non-Fatal Error
01/81 Host ROM Checksum Fatal Error
01/82 FLASH ROM Codeplug Checksum Fatal Error
01/88 External RAM Fatal Error — Note: not a checksum failure
01/90 General Hardware Failure Fatal Error
01/92 Security Partition Checksum Fatal Error
01/93 FLASHport Authentication Code Failure
01/98 Internal RAM Fail Fatal Error
01/A2 Tuning Codeplug Checksum Fatal Error
02/81 DSP ROM Checksum Fatal Error
02/88 DSP RAM Fatal Error — Note: not a checksum failure
02/90 General DSP Hardware Failure (DSP startup message not
received correctly)
09/10 Secure Hardware Error
09/90 Secure Hardware Fatal Error
Note: If the corrective action does not fix the failure, send the radio to the depot.
Operational Error
Codes
Error Code
FAIL 001
FAIL 002
64

Table 17. Power-Up Error Code Displays

Description
During radio operation, the radio performs dynamic tests to determine
if the radio is working properly. Problems detected during these tests
are presented as error codes on the radio's display. The presence of an
error code should prompt a user that a problem exists and that a
service technician should be contacted. Use Table 18 to aid in
understanding particular operational error codes.

Table 18. Operational Error Code Displays

Description
Synthesizer Out-of-Lock
Selected Mode/Zone Codeplug Checksum Error
Corrective Action
Reprogram the codeplug
Send radio to depot
Turn the radio off, then on
Send radio to depot
Send radio to depot
Reprogram the codeplug
Send radio to depot
Turn the radio off, then on
Send radio to depot
Send radio to depot
Send radio to depot
Send radio to depot
Send radio to depot
Turn the radio off, then on
Turn the radio off, then on
Turn the radio off, then on
Turn the radio off, then on
Corrective Action
a. Reprogram external codeplug
b. Send radio to depot
Reprogram external codeplug