Motorola HT-1000 Service Manual page 53

Mtx series
Hide thumbs Also See for HT-1000:
Table of Contents

Advertisement

Small Flat Blade
Screwdriver
Chassis
Assembly
Figure 5 Separating the Cover From the Chassis
b. Pry the bottom of the chassis free from the cover by pushing
the separation tool down and rotating the handle of the
separation tool over and behind the base of the radio. This
prying action forces the thin inner plastic wall toward the
base of the radio, which releases the two chassis base tabs.
NOTE:
A flexible ribbon cable (front cover/display
flex), which connects to the front cover
assembly and the chassis, keeps you from
completely separating the two units.
c. Lay the chassis down, and rotate the front cover back and
partially away from the chassis (see Figure 6).
Front Cover
Assembly
MAEPF-22571-O
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents