Test Equipment, Service Aids, And Tools; Recommended Test Equipment; Table 1 Recommended Test Equipment - Motorola HT-1000 Service Manual

Test Equipment,
Service Aids, and Tools
Recommended Test
Equipment
MOTOROLA
MODEL NUMBER
R2600 Series System Analyzer
R2670 (for trunking)
*R1097A Digital Multimeter
*R1150E Code Synthesizer
*R1527A Portable Test Receiver Counter; CTCSS, DCS, and
R1368A Dual-Trace
Oscilloscope
*S1350C Watt Meter
*ST1213B (VHF) Plug-in Element
*ST1223B (UHF) RF Dummy Load
R1065 Load Resistor
S1339A RF Millivolt Meter
*R1013B or SINAD Meter
*R1370A SINAD Meter V/RMS
S1347D or DC Power Supply
S1348D (programmable)
The list of equipment contained in Table 1 includes all of the standard
test equipment required for servicing two-way portable radios, as well
as several unique items designed specifically for servicing this family
of radios. Battery-operated test equipment is recommended when
available. The "Characteristics" column is included so that equivalent
equipment may be substituted; however, when no information is
provided in this column, the specific Motorola model listed is either a
unique item or no substitution is recommended.

Table 1 Recommended Test Equipment

DESCRIPTION CHARACTERISTICS
This monitor will substitute
for items with an asterisk (*)
4,000 counts
True RMS Metering
0.3% basic accuracy
DTMF decoder
20MHz bandwidth (some
system analyzers, R2000
series, are 15MHz bandwidth)
5mV to 5V/division
50-ohm, ±5% accuracy
10 Watts, maximum
0-1000MHz, 300W
10-watt Broadband
100µV to 3V rf
10kHz to 1.2GHz
RMS Audio Voltmeter
0-20Vdc, 0-5 Amps
current limited
2
APPLICATION
Frequency/deviation meter and
signal generator for wide-range
troubleshooting and alignment
Digital voltmeter recommended
for ac/dc voltage and current
measurements
Injection of audio and digital
signalling codes
Portable Radio Monitor
Waveform measurements
Transmitter power output
measurements
For use with Wattmeter
RF level measurements
Receiver sensitivity
measurements
Bench supply for 7.5Vdc
3