Appendix A Table 4. Rss Secure Parameters - Motorola HT-1000 Service Manual

Default
Parameter
Secure No
Equipped
XL IC Present No
Secure/Clear Select
Strapping
Strapping Clear
XL Transmit Enable
Scan Select Non-XL&XL
Scan Holdoff Both
Strapping
RX 2-Level Rx
Modulation
Proper Code Enabled
Detect (Conv)
Proper Code Disabled
Detect (Trunk)
TX Clear Enabled
Alert Tones
Periodic Enabled
Keyfail
Alert Tone
Non-XL Scan 275mS
Unsquelch
Duration
Non-XL Scan 875mS
Unsquelch
Duration
Appendix A- 10

Appendix A Table 4. RSS Secure Parameters

Radio
Possible
Wide/Per
Settings
Channel
Yes/No Radio Wide
Yes/No Radio Wide
Select/ Per Channel
Clear/
Secure
Select/ Per Channel
Clear/
Secure
Enable/ Per Channel
Disable
Non-XL/ Per Channel
Non-
XL&XL
Both/ Per Channel
Clear Only/
Secure Only
Auto Rx/ Per Channel
2-Level Rx
Enabled/ Per Channel
Disabled
Enabled/ Per Channel
Disabled
Enabled/ Radio Wide
Disabled
Enabled/ Radio Wide
Disabled
0-6375ms Radio Wide
0-6375ms Radio Wide
Used in
Conv/Trunk
Both Notifies radio that Secure
Module is present
Both Notifies radio that Secure
Module contains XL IC
Conv Sets channel to Clear-Only
or Secure-Only or user
Selectable
Trunk Sets channel to Clear-Only
or Secure-Only or user
Selectable
Conv Enables TX XL operation or
disables for CFB
Conv Selects between Non-XL and
XL Scan Unsquelch Duration
Conv Scan for Clear or Secure or
Both on a particular
channel
Conv Tells radio to look for 2&4
-level signals or 2-level
signals only
Conv Enables RX proper code
detection
Trunk Enables RX proper code
detection
Both Enables alert tone when
PTT is pressed while in
the Clear mode
Both Enables a Keyfail Alert
Tone to sound periodically
in a key-fail condition
Both The time after an activity
detect that radio will wait
on channel without an
unsquelch in Non-XL mode
Both The time after an activity
detect that radio will wait
on channel without an
unsquelch in XL mode
Description