Safeties During Operation; Protection Against Overflows; Temperature Limiter; Residual Heat - Fagor I-200TR - 02-08 Manual To Installation

EN 2 2 / USING YOUR APPLIANCE
SAFETY OF INDUCTION ZONES
• •
DURING OPERATION

•Temperature limiter

Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera-
ture of the bottom of the cookware. In the
event that an empty vessel is left on a cooking
zone that is on, this sensor automatically
adjusts the power output of the hob, thereby
avoiding any risk of damage to the cookware
or the hob.
•"Small Items" safety
A small object (such as a fork, a spoon, a ring,
etc.) left alone on the hob is not detected as a
piece of cookware.
The display flashes and no heat is produced.
Warning
Several small objects together on a
cooking zone may be detected as cook-
ware.
If the display remains on: power may be
supplied and the objects may be heated.
HOB SAFETY DURING OPERA-
TION

•Residual heat

After intensive use, the cooking zone that you
have just used can remain hot for several min-
utes.
An " " H H " " is displayed during this period.
Avoid touching the hot areas during this time.
Warning
Do not touch glowing cooking zones,
b b u u r r n n r r i i s s k k . .

•Protection against overflows

- - Overflow that spills onto the touch controls.
- Damp towel placed over the touch controls.
- Metallic object placed on the touch con-
trols.
Clean the hob or remove the object, then
begin cooking again.
•Auto-Stop system
If you forget to switch off a cooking zone,
your hob has an "A A u u t t o o - - S S t t o o p p s s y y s s t t e e m m " safety
function which automaticallty cuts off the
power to the cooking zone, after a predefined
period (between 1 and 10 hours depending
on the power used).
If this safety system is used, the cutoff to the
cooking zone is displayed as "A A S S " or "A A " on
the control panel and a "bip" sounds for about
2 minutes. Simply press any of the control
buttons to stop this.
A double beep will confirm your action.
76
The hob may shut down (with
the adjacent symbol in the
display) automatically in any
of these three situations: