Acer HDS AMS200 Reference Manual page 301

Table B.1 Host Connection Parameters
Host Group Option- Simple Setting
Platforms
Alternate Path
Fail Over
Detail Setting: The following parameters will be selected automatically according to simple setting.
Host Connection Mode 1 Standard Mode
(Select one of these
Open VMS Mode
modes)
Wolfpack Mode
TRESPASS Mode
Host Connection Mode 2 HP-UX
(Multiple selections)
PSUE Read Reject Mode
UA(06/2A00) Suppress
Mode
NACA Mode
HISUP OFF Mode
Reset Propagation Mode
Unique Reserve Mode 1
ASL Report Mode
(Active/Passive Group)
ASL Report Mode
(Active/Passive)
ASL Report Mode
(Active/Active)
Port ID No Report Mode
Port ID Conversion Mode
TruCluster Mode
Product Serial Response
Mode
Same Node Name Mode
CCHS Conversion Mode
SPC-2 Mode
Additional Parameter: Select these parameters only when you use the appropriate function. When selected, the following
parameters belonged to the appropriate Host Connection Mode will be selected automatically.
Logical Unit Number more than or equals to 8 can be
recognized by HP-
®
TrueCopy is used by HP-UX
™
VERITAS Database Edition/Advanced Cluster for
®
Oracle RAC (Solaris™) is used
® ®
Egenera BladeFrame Is used
: Parameter that is selected automatically by simple setting.
blank: Parameter that is selected manually if needed.
None
®
Mode
Note 3
(see )
HP-UX
None
MC/ None
Service
Guard
®
HP-UX Mode (see
PSUE Read Reject Mode
Not Selected
Not Selected
Acer | HDS AMS200 User and Reference Guide
®
PV Link VxVM
Note1
(see
MC/ None
Service
Guard
Note2
)
)
281