Acer HDS AMS200 Reference Manual page 210

4. From the Tools menu, select Configuration Settings or click Configuration Settings on
the tool bar:
5. Click the Maintenance LAN tab on the Configuration Settings screen.
6. Set the Maintenance LAN Information.
Note: The IP address which has the same network address as the IP address currently set for
the user-managed port or the NNC management port has cannot be set. In the event that
this IP address is set, an error will occur when clicking the Apply on the Parameter screen.
7. Click the Apply button on the Configuration Settings screen after the setting is
completed.
190 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem