Setting A Spare Disk - Acer HDS AMS200 Reference Manual

7.4.1

Setting a Spare Disk

To set a spare disk, follow these steps:
1. Turn on the power supply.
Note: If the power supply has been turned on, proceed to the next step.
2. Start the Storage Navigator-Modular program, and set the operation mode to
Management Mode.
3. Double-click the icon of an array unit in the Main window. Once the array unit
information displays, select the Settings menu.
4. On the Settings menu, select Display Details or click Display Details on the toolbar.
5. Click the Logical Status tab on the Unit Window:
(NAS)
6. Double-click the Spare Drives icon.
134 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem