Reading Failure Information; How To Read Failure Information - Acer HDS AMS200 Reference Manual

8.4.6

Reading Failure Information

The history of the unit, after it is turned on, is displayed in the Information Message.
The Subsystem is Ready message displays the time when the unit is ready. Messages
sent after the power is turned on until the unit is ready are displayed prior to this
message. Messages sent after the unit is ready are displayed after this message.
Carefully observe the following: Wxxxxx (Warning message), Hxxxxx (Failure message),
and Rxxxxx (Flash detection message).
The following messages are displayed when failures occur and when they are solved. If
the recovery message is displayed after a failure occurrence message, the failure has
been solved.
Table 8.9 How to Read Failure Information (continues to the next page)
No. Description
1 Controller error/recovery
2 Cache memory error/
recovery
3 Battery error/recovery
4 Battery backup circuit
error/ recovery
5 Fan error/recovery
6 Power supply error/
recovery
Failure detected messages
W00100 CTL alarm (CTL-x)
W0D0xy CACHE alarm (CTL-x,
CACHE-y)
W0300x Battery alarm
W0310x Battery removed
W0320x Battery SW off
W0330x Battery Thermal alarm
W0340x Battery backup circuit alarm
(CTL-x)
W040xy FAN alarm (Unit-x, FAN-y)
W04100 FAN alarm (CTL-Unit, FAN-x)
W050xy PS alarm (Unit-x, PS-y)
W0G400 PS alarm [RKA] (Unit-x, PS-
y)
W0G500 PS alarm [RKAAT] (Unit-x,
PS-y)
W0G600 PS alarm [RKAJ] (Unit-x, PS-
y)
W0G700 PS alarm [RKAJAT] (Unit-x,
PS-y)
W05100 PS alarm (CTL-Unit, PS-x)
Acer | HDS AMS200 User and Reference Guide
Failure recovery messages
I0010x CTL recovered (CTL-x)
I0020x CACHE recovered
(CACHE-x)
I00300 Battery recovered
I0030x Battery recovered
(Battery-x)
I0040x Battery backup circuit
recovered (CTL-x)
I005xy FAN recovered (Unit-
xx, FAN-y)
I00500 FAN recovered (CTL-
Unit, FAN-x)
I006xy PS recovered (Unit-x,
PS-y)
I00600 PS recovered (CTL-
Unit, FAN-x)
251