8.1.6
The WARNING LED Has Turned On or Blinks
When the WARNING LED has turned on or blinks, follow these steps:
1. Does the WARNING LED blink?
Yes: Call your Customer Engineer. Go to step 5.
No: Go to step 2.
2. Is the READY LED on?
Yes: Go to step 3.
No: Refer to section 8.1.3.
3. Identify in which components a failure resides.
Note: Refer to section 4.7.5 to identify failed components whose LEDs indicate their
respective failures.
4. Continue to use the equipment and contact the Customer Engineer.
5. End of the procedure
Acer | HDS AMS200 User and Reference Guide
213