Handset Layout - AT&T Trimline TR1909 User Manual

Getting started

Handset layout

IN USE
Flashes quickly when there is an
incoming call.
Flashes slowly when the
telephone line cord is not
plugged into a wall jack or
another telephone at the same
line is in use.
OPTION
Press to display the setting
options.
While in the option menu, press
to save the selection and move
to the next feature (page 10).
REMOVE
While viewing the call log,
press to delete entry currently
displayed, press and hold to
remove all entries (page 24).
M1, M2, M3
Press to dial a one-touch
number from the memory
(page 18).
Listening volume
Adjust the handset listening
volume to LO, MED, or HI
(page 16).
MEMORY
Press to access telephone
numbers stored in the
memory (page 19).
MUTE
Press and hold MUTE to silence
the microphone to prevent the
other party from hearing you,
but you will still be able to hear
the other party. Release MUTE
to return to the original two-way
conversation (page 17).
When the telephone is in idle
mode, press to display caller ID
information (page 23).
Press to exit dialing, to exit storing
a number in memory, to exit the
call log, or to return to the idle
screen anytime without saving the
changes.
Press to dial the number currently
displayed (page 23).
When there is a call waiting signal,
press FLASH to put the current call
on hold and connect to the new
call. Press FLASH again to return
to the original call. Also, press
FLASH to activate other telephone
company subscriber services such
as three-way calling (page 17).
When held, the telephone is in
idle mode.
When released, the telephone is
ready to make a call.
When the handset is lifted, press
to redial the last number dialed
(page 16).
When storing a number in the
memory, press to insert a 3-
second pause in the dialing
sequence.
Press to store a telephone
number in the memory (page 18).
2
CALL LIST /
CLEAR
DISPLAY DIAL
FLASH
Switch hook
PAUSE/REDIAL
PROG