Telephone memory
10 : 03
12/01
AM
E1 Pro
800-222-3111
NOTES:
•
When you store a
new number in the
one-touch location,
the old entry will be
replaced and cannot
be retrieved.
•
If no action is taken
for 10 seconds,
the telephone
returns to idle
mode automatically
without saving your
selection.
Memory operation (one-touch)
This telephone has 13 memory locations with
three one-touch dialing location keys (M1,
M2, M3), and 10 two-touch dialing locations
keys (0 through 9). Each location can hold a
number up to 32 digits.
To store a number in one-touch
You can store three numbers in one-touch
dialing location M1, M2 or M3.
To store a number in one-touch:
1.
2.
01
CALL#
3.
NEW
REP
To review a number in one-touch
To review a number in the one-touch
location, lift the handset and hold the switch
hook on the handset, then press a one-touch
key (M1, M2 or M3). The number stored in
the one-touch location is displayed on the
screen.
To dial a number in one-touch
To dial a number in the one-touch location,
lift the handset and then press a one-touch
key (M1, M2 or M3).
Lift the handset and press PROG.
Use the dial pad keys (0 through 9,
#) to enter the number you want to store.
Press PAUSE/REDIAL once to store a
3-second pause in the dialing sequence,
twice for a 6-second pause and so on.
- OR -
Press PAUSE/REDIAL to store the last
number dialed.
Press a one-touch memory location (M1,
M2 or M3) where you want the number to
be stored.
18
and