Copying A Call Log Entry Into Memory - AT&T Trimline TR1909 User Manual

Caller ID operation
10 : 03 12/01
AM
800-222-3111
CHARLIE JOHNSON

Copying a call log entry into memory

When you are reviewing call log entries, you can
copy the displayed entry with up to 32 digits
01
CALL#
NEW
and 15 characters to a one-touch or two-touch
REP
memory location
1. Lift the handset.
2. Press
Press PROG on the handset.
3.
4. Press any one-touch location (M1, M2, or M3)
where you want the number to be stored.
- OR -
Press MEMORY, then press any dial pad key
(0 through 9) where you want the number to
be stored.
NOTES:
• Press CLEAR on the back of the handset when
you have finished storing a number in memory
to exit programming.
• If you wait longer than 10 seconds to delete or
copy the entry, the procedure will time-out and
you have to begin again.
• If there is no battery power for more than 10
minutes, the call log information will be lost.
or to display the call log.
25