Related Manuals for AT&T Disk, Wall, Trimline Single Line Business Telephone
Summary of Contents for AT&T Disk, Wall, Trimline Single Line Business Telephone
- Page 1 AT&T SINGLE LINE BUSINESS TELEPHONES DESK, WALL AND TRIMLINE® MODELS APRIL 1986 ISSUE 3 403683022 999-500-270-IS 950-270-IS...
- Page 2 This booklet contains installation and removal instructions for standard modular desk or wall telephones. Installation of the following options requires a professional installer. Adjunct Dialer SPOKESMAN® Loudspeaker External Speakerphone Headset Adapter Contact your place of purchase for details. Make sure your package contains the following items: Telephone Handset...
-
Page 3: Installation
Jack For Wall Telephone Figure 1. Standard Modular Telephone Jacks If you do not have a standard modular telephone jack, contact your local telephone company or AT&T Information Systems for details on converting your present outlet to a modular jack. Your telephone is fully assembled except for the coiled handset cord and clear line cord. - Page 4 BASE COILED HANDSET CORD Figure 3. Setting the Ringer Volume Control (Desk and Trimline Telephones) Plug the other end of the cord into the telephone jack in your office. Push the plug in until it clicks. Turn your telephone over or for Trimline telephones, lift the handset.
- Page 5 Plug one end of the coiled handset cord into the jack in the handset. Push the plug in until it clicks. Plug the other end of the cord into the jack in the bottom of the wall base. Push the plug in until it clicks. Adjust the ringer volume switch on the upper right side of the telephone to the desired setting.
- Page 6 All terms and conditions specified in your agreement with AT&T apply. Federal Communications Commission Registration Information Statement (Part 68) The following information is applicable only to equipment connected directly to the telephone network and not to connection of stations behind terminal systems. The following equipment is registered with the Federal Communications Commission (FCC) in accordance with Part 68 of its...
- Page 7 In compliance with the rules, you should be aware of the following: Connection of this equipment to the telephone network must be through one of the standard network interface jacks listed above. These may be ordered from the local telephone company or through AT&T Information Systems as your authorized agent.
- Page 8 company may temporarily discontinue your service and, if possible, notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC.