Upgrading Through Command Lines; Upgrading Using Ftp - 3Com S7906E Getting Started Manual

3. Set XMODEM protocol parameter
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Enter 0 to return to the Boot Menu.
BOOT
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):
Enter 0 to reboot the switch. The Boot ROM upgrade is completed.

Upgrading Through Command Lines

If your terminal is connected to the switch over a network, you can upgrade the Boot ROM program and
host software through command lines.

Upgrading Using FTP

Run the FTP Server on the local PC (assume its IP address is 10.10.110.1). Ensure that you have
configured the username and password and set the correct file directory. Log into the switch through
Telnet or the console port, and then download the host software package to the switch using FTP.
Assume that:
The main boot file is SWITCH002.app.
The active host software is SWITCH001.app.
Follow these steps after logging into the switch.
1) Download the software to the switch using FTP.
<3Com> ftp 10.10.110.1
Trying ...
Press CTRL+K to abort
Connected to 10.10.110.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):liujidong
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] binary
[ftp] get SWITCH002.app
[ftp] bye
MENU
6-14