Remote Upgrading Through Cli - 3Com 4210 Release Notes

Switch 4210 V3.01.09 Release Notes

Remote Upgrading through CLI

A network administrator runs FTP Server on a local computer (at 10.10.110.1), Telnet to a switch,
upload the application through FTP to the switch. Suppose the application is SWITCH.bin, Boot Rom
program is SWITCH.btm. Execute the following commands in user view:
The FTP server as follows:
Figure 1 FTP sever
<H3C> ftp 10.10.110.1
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):lyt
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get SWITCH.bin
[ftp] get SWITCH.btm
[ftp] bye
<H3C> boot bootrom SWITCH.btm
please wait ...
Bootrom is updated!
<H3C> boot boot-loader SWITCH.bin
<H3C> display boot-loader
The app to boot at the next time is: flash:/ SWITCH.bin
<H3C> reboot
The application upgrading is done. (It requires rebooting the switch.)
Note: If there is not enough space in Flash memory, you can upgrade Boot Rom first, and then upload
the applications through FTP to the switch.
Note: Do not power off the switch during upgrading process.
The following sections introduce common local upgrading measures.
February 27, 2009 Page 37 of 43