D-Link DES-3326 User Manual page 94

Loading Factory Defaults
Loading the factory defaults returns the switch's configuration to the factory default values. This will
clear all settings and restore them to their initial values listed in the appendix.
Highlight Reboot from the Main Menu and press Enter.
To execute a factory reset, highlight either Reboot & Load Factory Default Configuration or Reboot &
Load Factory Default Configuration Except IP Address and press enter. A confirmation screen will
appear.
Highlight Yes and press Enter to reset the switch's NV-RAM to the factory default settings. This will erase
any User Accounts (and all other configuration settings) you may have entered and return the switch to the
state it was in when it was purchased.
Logging Onto The Switch Console
To log in once you have created a registered user, from the Login screen:
1. Type in your Username and press Enter.
2. Type in your Password and press Enter.
Figure 6-7. Main Menu
Figure 6-8. System Reboot menu
94
DES-3326 Layer 3 Fast Ethernet Switch User's Guide