D-Link DES-3326 User Manual page 237

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set:
Static ARP
To make a static ARP entry:
Click the Static ARP link on the IP Forwarding menu (under Configuration − Forwarding):
To delete an existing static ARP entry, click the Delete icon corresponding to the entry you want to
delete.
To add a new static ARP entry, click the New icon:
Figure 7-53. Static/Default Routes – Add window
Parameter
IP Address
<0.0.0.0>
Subnet Mask
<0.0.0.0>
Gateway IP
<0.0.0.0>
Metric <1 >
Figure 7-54. Static ARP window
Figure 7-55. Static ARP – Add window
Description
Allows the entry of an IP address
that will be a static entry into the
switch's Routing Table.
Allows the entry of a subnet mask
corresponding to the IP address
above.
Allows the entry of an IP address of a
gateway for the IP address above.
Allows the entry of a routing protocol
metric representing the number of
routers between the switch and the
IP address above.
237