D-Link DES-3326 User Manual page 128

The following fields can be set:
Action:<Add/Modify
>
Area ID:[0.0.0.0 ]
Type:<Normal>
Stub
Summary LSA:<Yes>
Stub Default
Cost:[ 0
OSPF Interface Configuration
This screen allows the association of IP interfaces with OSPF areas. The IP interfaces must have been
previously defined on the switch.
To configure an OSPF interface, highlight OSPF Interface Configuration from the Setup OSPF menu
and press Enter.
Parameter
This field can be toggled using the space bar between
Add/Modify and Delete. Add/Modify allows for the
creation of a new OSPF Area or changes to an existing
OSPF Area. Delete allows for the deletion of an existing
OSPF Area.
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF
area in the OSPF domain.
This field can be toggled between Normal and Stub
using the space bar. When it is toggled to Stub,
additional fields appear − Stub Import Summary LSA,
and Stub Default Cost.
Import
Displays whether or not the selected Area will allow
Summary Link-State Advertisements (Summary LSAs)
to be imported into the area from other areas.
Displays the default cost for the route to the stub of
between 0 and 65,535. The default is None (0).
]
Figure 6-46. OSPF Interface Configuration screen
DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Description
128