D-Link DES-3326 User Manual page 103

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Toggle the Serial port setting field to select either the Console or SLIP protocol.
The following fields can then be set:
Console Settings
SLIP Settings
Figure 6-18. Serial Port Settings screen
Parameter
Baud Rate
Data bits
Stop bits
Auto-Logout
Parameter
Baud Rate
Description
Displays the serial bit rate used to
communicate with
station. The console baud rate is 9600
bits per second.
Displays the number of bits that make
up a word when communicating with
the management station. The console
interface uses 8 data bits.
Displays the number of bits used to
indicate that a
completely transmitted.
interface uses 1 stop bit.
This sets the time the interface can be
idle before the switch automatically
logs-out the user. The options are 2
mins, 5 mins, 10 mins, 15 mins, or
Never.
Description
Sets the serial bit rate that will be used
to communicate the next time the
Switch is restarted. Applies only when
the serial port is being used for out-of-
band (SLIP) management; it does not
103
a management
word has been
The console