Snmp View Table - D-Link DES-3250TG User Manual

SNMP View Table

The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by an
SNMP manager.
D-Link DES-3250TG Standalone Layer 2 Switch
User Name
Group Name
SNMP Version
If Encryption (V3 only) is
checked configure also:
Auth-Protocol
If Encryption (V3 only) is
checked configure also:
Priv-Protocol
Type in the new SNMP V3 user name or
community string for V1 or V2. This can be
any alphanumeric name of up to 32
characters that will identify the new SNMP
user.
Type in the new SNMP V3 group name.
Again, this can be any alphanumeric name of
up to 32 characters that will identify the
SNMP group the new SNMP user will be
associated with.
From the pull-down menu select:
V1 – To specifies that SNMP version 1 will
be used.
V2 – To specify that SNMP version 2 will be
used.
V3 – To specify that the SNMP version 3 will
be used.
In the Space provided, type an alphanumeric
sting of between 8 and 20 characters that will
be used to authorize the agent to receive
packets for the host.
From the pull-down menu select:
MD5 − To specify that the HMAC-MD5-96
authentication level will be used.
SHA − To specify that the HMAC-SHA-96
authentication level will be used.
In the Space provided, type an alphanumeric
string of between 8 and 16 characters that
will be used to encrypt the contents of
messages the host sends to the agent.
115