Igmp; Igmp Snooping - D-Link DES-3250TG User Manual

The user may globally set the maximum amount of time, in minutes, that an Address Resolution Protocol (ARP) entry can
remain in the Switch's ARP table, without being accessed, before it is dropped from the table. The value may be set in the
range of 0-65535 minutes with a default setting of 20 minutes. To add and an ARP entry click Add. The following window
will appear.
The following fields can be set or viewed:

IGMP

IGMP Snooping

From the Configuration menu, select the IGMP folder, and then click IGMP Snooping to open the following window:
To edit an IGMP Snooping entry on the switch, click the Modify button next to the entry on the Current IGMP Snooping
Group Entries window. The IGMP Snooping Settings window, shown below, will appear.
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 11. Static ARP Settings (Add) window
Parameter
IP Address
MAC Address
Figure 7- 12. Current IGMP Snooping Group Entries window
Description
The IP address of the ARP entry.
The MAC address of the ARP entry.
43