Power Source - Sharp MS702 - MiniDisc Recorder Operation Manual

POWER SOURCE

This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, an optionally available battery case (AD-M70BC), and an optionally available
car adaptor (AD-CA20X).
1
2
5
:OFF
DC IN 5V
To the
Insert
DC IN 5V
securely,
jack 4
all the
way in.
AC 120V, 60 Hz
To an AC outlet
Notes:
After charging is complete, the AC
adaptor may be left connected. (For ex-
ample, when charging at night)
The battery will not be charged when-
ever the power to the main unit is
turned on.
If the AC adaptor is removed from the
main unit or from the AC outlet while
charging, " " will not disappear for
about 1 minute. This is normal.
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of non use, be sure to
charge it fully.
1
Open the rechargeable battery com-
partment cover.
2
Insert the rechargeable battery.
Mark
Insert the side with the arrow first.
3
Close the rechargeable battery com-
partment cover.
4
Plug the AC adaptor into the AC outlet,
and then insert the plug on the AC
adaptor cord into the DC IN 5V jack.
5
Press the /:OFF button twice to begin
charging.
" " will appear, and the battery will
begin charging.
Battery charging will be complete in 2.5
hours. When the charging is com-
plete, " " will go out.
Do not force open the rechargeable
battery door too far.
Do not attach the optionally available
battery case when charging the internal
battery.
6
MD-MS702