Sharp MS702 - MiniDisc Recorder Operation Manual page 29

Combine
1
Start playing the last of the two tracks you
want to combine, and press the
ton.
The unit will enter the pause mode.
2
Press the EDIT/A.MARK/TIME MARK
button to select "COMBINE".
2
1
To combine the fifth
and sixth tracks
3
Press the ENTER/F.PLAY/SYNCHRO
button.
To cancel the operation, press the /:OFF
button.
3
(Confirming the combination)
4
Press the ENTER/F.PLAY/SYNCHRO
button again.
The two tracks will be combined, and the
unit will be paused at the beginning of the
combined track.
The numbers assigned to the tracks fol-
lowing the combined track will be
decreased by one automatically.
To combine two non-contiguous
tracks:
First, put the two tracks next to each other in
the order you want using the MOVE function
(page 27). Then combine them using the
COMBINE function.
When one or both tracks to be
combined have a name:
The first track name will be used. However,
when the first track does not have a name,
the second track name will be used.
In the following cases, tracks cannot be
combined.
Tracks recorded in the monaural long-play
mode and tracks recorded in the stereo
mode.
Tracks recorded from digital inputs and
tracks recorded from analog inputs.
Tracks whose recording time is less than
12 seconds.
Disc name
Discs can be named using a maximum
06
of 100 characters.
but-
Up to 1,700 characters (approximately)
can be used in the disc and track
names on a single MiniDisc.
1
While in the stop mode, press the
EDIT/A.MARK/TIME MARK button to
select "DISC NAME".
2
Press the ENTER/F.PLAY/SYNCHRO
button.
The unit will enter the character input
mode.
To cancel the operation, press the
/:OFF button.
1
3
Press the
repeatedly to select the type of charac-
ters.
The first 3 characters in the group of
the selected characters will be dis-
played for about 1 second.
!"# (Symbols)
ABC (Capital letters)
4
Press the + or - button repeatedly to
select the first letter in the name.
When the button is pressed con-
tinuously, the displayed character will
change rapidly.
3
Continued on the following page.
28
2
Cursor
CHARACTER button
4
MD-MS702