Sharp MS702 - MiniDisc Recorder Operation Manual page 30

5
4
When the letter you want is displayed,
press the button.
To enter more letters in the name, repeat
steps 3 - 5.
6
When the disc name has been completely
entered, press the ENTER/F.PLAY/SYN-
CHRO button.
5
6
Position where the next
letter will be entered
If an incorrect letter is entered:
To erase a character: 5 4
Press the or button to move the
cursor to the character you want to erase,
and then press the BASS/DEL button.
To correct a character: 5 4
Press the or button to move the
cursor to the character you want to correct,
and then enter the correct character.
Even after all the letters have been
entered, you can still go back and cor-
rect any mistakes.
When you want to enter lowercase
letters:
Enter capital letters as described in step 4
and press the DISPLAY button to change
them to the lowercase letters.
If you press this button again, the letters
will be changed back to capital letters.
To enter a space:
4
Press the + or – button to select "SPACE".
Then, press the button to enter a
space.
Type of
characters
Capital letters
Symbols
indicates a space.
Track name
Up to 100 characters can be entered for
each name.
1
Play the track which you want to name,
and press the
The unit will enter the pause mode.
2
Press the EDIT/A. MARK/TIME MARK
Lights
button to select "Tr NAME".
up
When "Tr NAME" is selected while in
the stop mode, track numbers can be
changed using the
1
Track number that you
want to give a track name
3
Press the ENTER/F.PLAY/SYNCHRO
button.
The unit will enter the character input
mode.
To cancel the operation, press the
/:OFF button.
4
Perform steps 3 - 5 in the "Disc name"
section.
5
When the track name is completely
entered, press the ENTER/F.PLAY/
SYNCHRO button.
Characters <symbols>
(They are selected using the + or – button.)
A B C D E V W X Y Z
0 1 2 3 4 5 8 9
/ ' . , – + : ( ) & < >
_
`
! ? ; " # $ % = @
*
29
06
button.
5 4
or button.
2
.
Returns to
.
Returns to
MD-MS702