Adsl - D-Link DSL-G804V User Manual

ADSL

This is the ADSL parameter adjustment and information section. The parameter is already being pre-defined and
not necessary to reconfigure if you do not understand this feature.
Parameter
Connect Mode
Modulation
Activate Line
Coding Gain
Tx Attenuation
DSP Firmware
Version
Connected
Operational Mode
Annex Type
Upstream Bit Rate
Downstream Bit
Rate
DSL-G804V Wireless ADSL Router User's Guide
Figure 4-23. ADSL
Description
Connection line mode ADSL2/ADSL2+.
For ADSL connection, this mode will automatically detect your ADSL line code,
G.dmt, G.lite, and T1.413. But in some area, multimode cannot detect the
ADSL line code well. If it is the case, please adjust the ADSL line code to
G.dmt or T1.413 first. If it still fails, please try the other values such as ALCTL,
ADI, etc. For ADSL2 connection, this mode automatically detects your line
code to G.DMT.Bis.
Aborting (false) your ADSL line and making it active (true) again for taking
effect with setting of Connect Mode.
Configure the ADSL coding gain from 0 dB to 7dB, or automatic.
Setting ADSL transmission attenuation.
Firmware version of the Digital Signal Processor.
Display current ADSL line sync status.
ADSL Annex A, which works over a standard telephone line. Annex B, which
works over an ISDN line.
Display current upstream rate of your ADSL line.
Display current downstream rate of your ADSL line.
65