Table of Contents
Advertisement
Section 4 - Configuration
ADSL is one of the first home broadband technologies introduced. ADSL uses the DSL port
on your DSL-2888A to connect to the Internet. In order for your DSL-2888A to use ADSL,
you must configure the ADSL Settings, your ISP Settings, and your IPv4/IPv6 Settings.
WAN Access Type:
Select ADSL to configure ADSL connection settings.
Interface:
Select the interface from the drop-down menu. ATM0-ATM7 are
available. The default is ATM0.
Enable Interface:
Select whether to enable or disable this interface.
ISP Settings
VPI:
Enter the Virtual Path Indicator (0 - 255).
VCI:
Enter the Virtual Channel Indicator (32 - 65535).
VLAN Tagged:
Enable or disable VLAN tagging.
If you enabled VLAN Tagged, the following options are available:
VLAN ID:
Enter the VLAN ID. The value should be 0, or 0-4079.
VLAN Priority:
Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
Advanced Settings
Encapsulation:
Select the method of encapsulation provided by your ISP. You can
select LLC or VCMUX.
ATM QoS:
Select the Quality of Service type from the drop-down menu.
Configure the associated settings
Proceed to IPv4 Settings on page 32 or IPv6 Settings on page 36.
D-Link DSL-2888A User Manual
ADSL
DSL-2888A HW:V1.0.0 FW:V1.1.43
Settings >> Internet
ISP SETTINGS
Home
Settings
Features
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
DSL Profile
Priority
⌵
WAN Access Type:
ADSL
⌵
Interface:
ATM 0
Enable Interface:
Enabled
VPI:
VCI:
VLAN Tagged:
Enabled
VLAN ID:
⌵
VLAN Priority:
Disable
⌵
Encapsulation:
VC MUX
⌵
ATM QoS:
Non Realtime VBR
Sustainable Cell Rate:
undefined
Maximum Burst Size:
undefined
Minimum Cell Rate:
undefined
Management
Save
Advanced Settings ...
28
- Quick Links:
- Leds
- Setup Wizard
Hide quick links:
Advertisement
Table of Contents
