Access The Configuration Manager; Login To Home Page - D-Link DSL-G804V User Manual

Access the Configuration Manager

Now that your computer's IP settings allow it to communicate with the Router, you can access the configuration
software.
Be sure that the web browser on your computer is not configured to use a proxy server
in the Internet settings. In Windows Internet Explorer, you can check if a proxy server is
enabled using the following procedure:
1. In Windows, click on the Start button, go to Settings and choose Control Panel.
2. In the Control Panel window, double-click on the Internet Options icon.
3. Click the Connections tab and click on the LAN Settings button.
Note
4. Verify that the "Use proxy server" option is NOT checked. If it is checked, click in the
checked box to deselect the option and click OK.
Alternatively, you can access this Internet Options menu using the Tools pull-down
menu in Internet Explorer.
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the
Router. Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The
URL in the address bar should read: http://192.168.1.1.

Login to Home Page

A new window will appear and you will be prompted for a user name and password to access the web-based
manager.
Use the default user name admin and password admin for first time setup. You should change the web-based
manager access user name and password once you have verified that a connection can be established. The user
name and password allows any PC within the same subnet as the Modem to access the web-based manger.
Do not confuse the user name and password used to access the web-based manager
with the ADSL account user name and password needed for PPP connections to
access the service provider's network.
Note
DSL-G804V Wireless ADSL Router User's Guide
Figure 3-1. Home - Login window
15