D-Link DSL-G804V User Manual page 29

Parameter
Username
Password
Service Name
IP Address
Authentication
Protocol
Connection
Idle Timeout
RIP (Routing
Information
Protocol)
MTU (Maximum
Transmission Unit)
NAT (Network
Address
Translation)
ATM Class
DSL-G804V Wireless ADSL Router User's Guide
Description
Enter your username given by your ISP. This is case sensitive and uses the
format of "username" instead of username@ispname.
Enter your password given by your ISP. This is case sensitive.
(optional) This is for identification purpose. If this is requested, you will get
informed by your ISP. Maximum input is 20 alphanumeric characters.
(optional) This option is only available if you have given a fixed IP address
from your ISP. Enter 0.0.0.0 to get a random assigned IP from your ISP;
Username and Password must be entered.
Default is Chap(Auto). Your ISP will advise you whether to use Chap or Pap.
How you like establish your PPPoA connection, Always on or Connect on
Demand.
Always on: If you want the router to establish a PPPoA session when starting
up and to automatically re-establish the PPPoE session when disconnected by
the ISP.
Connect to Demand: If you want to establish a PPPoA session only when
there is a packet requesting access to the Internet (i.e. when a program on
your computer attempts to access the Internet).
Auto-disconnect the PPPoA connection when there is no activity on the line for
a predetermined period of time.
It is an interior routing protocol for router to exchange routing information.
This is the size of largest datagram (excluding media-specific headers) that IP
will attempt to send through the interface. The default setting is 1500.
This allows multiple users to access the Internet through a single ISP account,
sharing a single IP address. If users on your LAN have public IP addresses
and can access the Internet directly, the NAT function can be disabled.
The Quality of Service for ATM layer.
21