D-Link DSL-G804V User Manual page 59

IPSec (IP Security Protocol)
Parameter
Connection Name
Local Network
Remote Secure
Gateway IP
Remote Network
Proposal
DSL-G804V Wireless ADSL Router User's Guide
Figure 4-13. VPN – IPSec
Description
A user-defined name for the connection. No digital number is allowed.
Set the Single address, subnet or IP range of the local network.
IP Address: The IP address of the local host.
Netmask: The subnet of the local network. For example, IP: 192.168.0.0 with
netmask 255.255.255.0 specifies one class C subnet starting from 192.168.0.1
(i.e. 192.168.1.1 through to 192.168.1.254)
End IP: The IP address range of the local network. For example, IP:
192.168.0.1, end IP: 192.168.0.10
The IP address or hostname of the remote VPN device that is connected and
establishes a VPN tunnel.
Set the Single address, subnet or IP range of the remote network.
IP Address: The IP address of the remote host.
Netmask: The subnet of the remote network. For example, IP: 192.168.1.0
with netmask 255.255.255.0 specifies one class C subnet starting from
192.168.1.1 (i.e. 192.168.1.1 through to 192.168.1.254).
End IP: The IP address range of the remote network. For example, IP:
192.168.1.1, end IP: 192.168.1.10.
Select the IPSec security method. There are two methods of checking the
authentication information,
(Encapsulating Security Payload). Use ESP for greater security so that data
will be encrypted and authenticated. Using AH data will be authenticated but
not encrypted.
AH (authentication
51
header) and ESP