D-Link DSL-G804V User Manual page 32

IPoA (RFC1577, Classic IP and ARP over ATM)
Parameter
IP Assignment
RIP (Routing
Information
Protocol)
MTU (Maximum
Transmission Unit)
NAT (Network
Address
Translation)
ATM Class
DSL-G804V Wireless ADSL Router User's Guide
Figure 3-7. WAN Setup window - IPoA
Description
Please click Obtain an IP address automatically via DHCP client to enable
the DHCP client function or click Specify an IP address to disable the DHCP
client function, and specify the IP address, Netmask and Gateway manually.
The setting of this item is specified by your ISP.
It is an interior routing protocol for router to exchange routing information.
This is the size of largest datagram (excluding media-specific headers) that IP
will attempt to send through the interface. The default setting is 1500.
This allows multiple users to access the Internet through a single ISP account,
sharing a single IP address. If users on your LAN have public IP addresses
and can access the Internet directly, the NAT function can be disabled.
The Quality of Service for ATM layer.
24