D-Link DSL-G804V User Manual page 82

Figure 4-31. Device Management – UPnP, SNMP V1 and V2, and SNMP V3
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data
transfer between devices. UPnP offers many advantages for users running NAT routers through UPnP NAT
Traversal, and on supported systems makes tasks such as port forwarding much easier by letting the application
control the required settings, removing the need for the user to control advanced configuration of their device.
Parameter
UPnP
UPnP Port
SNMP V1 and V2 (Simple Network Management Protocol Version 1 and Version 2)
Parameter
Read Community
Write Community
Trap Community
SNMP V3 (Simple Network Management Protocol Version 3)
Specify a name and password for authentication. And define the access right from identified IP address. Once the
authentication has succeeded, users from this IP address will be able to view and modify the data.
DSL-G804V Wireless ADSL Router User's Guide
Description
Disable or activate the router's UPnP functionality.
Its default setting is 2800. It is highly recommended for users to use this port
value. If this value conflicts with other ports already being used you may wish
to change the port.
Save to flash and restart the router).
Description
Specify a name to be identified as the Read Community, and an IP address.
This community string will be checked against the string entered in the
configuration file. Once the string name is matched, user obtains this IP
address will be able to view the data.
Specify a name to be identified as the Write Community, and an IP address.
This community string will be checked against the string entered in the
configuration file. Once the string name is matched, users from this IP address
will be able to view and modify the data.
Specify a name to be identified as the Trap Community, and an IP address.
This community string will be checked against the string entered in the
configuration file. Once the string name is matched, users from
address will be sent SNMP Traps.
(Important: This setting will become effective after you
74
this IP