Yamaha DM1000 Owner's Manual page 95

■ Viewing Faders and On/Off Parameters
To display the View | Fader page, use the corresponding [SEL] button or fader to select the
desired Aux Out (1–8), then press the DISPLAY ACCESS [VIEW] button, then the [F2] but-
ton.
• ON/OFF.........................This button turns the currently-selected Aux Out (1–8) on or
• Fader ..............................This fader sets the currently-selected Aux Out (1–8) level. It
Setting Aux Out 1–8 from the Display
off. It links with the corresponding [ON] (1–8) button in the
Master layer.
links with the corresponding fader (1–8) in the Master layer.
The fader knob is highlighted when the fader is set to 0.0dB.
95
DM1000—Owner's Manual
8