Yamaha DM1000 Owner's Manual page 204

204
Chapter 16—Automix
5 To locate an event, play the Automix and move the cursor to the CAPTURE
button, then press [ENTER].
The current position is captured and indicated in the Capture memory display.
Tip:
• To modify the captured position, move the cursor to the Capture memory display, then rotate
the Parameter wheel or press the [INC]/[DEC] buttons. Press the [ENTER] button to reset
the currently-selected digit to "00."
• Up to eight timecode values can be captured in the Capture memories. To recall another
Capture memory, move the cursor to the parameter box located to the left of the CAPTURE
button, then select the desired Capture memory number (1–8).
6 To recall the event at the captured position, move the cursor to the LOCATE
button, then press [ENTER].
The event at (or closest to) the captured position is displayed and selected in the event list.
7 To insert a new event, use the Event select buttons to select the type of event
that you want to insert. Use the Capture memory display to specify the point
at which you want to insert the new event. Move the cursor to the INSERT
button, then press [ENTER].
The new event is inserted at the position currently displayed in the Capture memory dis-
play.
DM1000—Owner's Manual