Yamaha DM1000 Owner's Manual page 299

RING MOD.
Two input, two output ring modulator.
Parameter
SOURCE OSC, SELF
OSC FREQ 0.0–5000.0 Hz
FM FREQ. 0.05–40.00 Hz
FM DEPTH 0–100%
SYNC OFF, ON
1
NOTE FM
1.
MOD. FILTER
Two input, two output modulation filter.
Parameter
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
PHASE 0.00–354.38 degrees
TYPE LPF, HPF, BPF
OFFSET 0–100
RESO. 0–20
LEVEL 0–100
SYNC OFF, ON
1
NOTE
1.
DISTORTION
One input, two output distortion effect.
Parameter
DST1, DST2, OVD1,
DST TYPE
OVD2, CRUNCH
DRIVE 0–100
MASTER 0–100
TONE –10 to +10
N. GATE 0–20
Range
Modulation source: oscillator or input signal
Oscillator frequency
Oscillator frequency modulation speed
Oscillator frequency modulation depth
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FM FREQ
Range
Modulation speed
Modulation depth
Left-channel modulation and right-channel modulation
phase difference
Filter type: low pass, high pass, band pass
Filter frequency offset
Filter resonance
Output level
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ
Range
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone
Noise reduction
Effects Parameters
Description
Description
Description
DM1000—Owner's Manual
299