Yamaha DM1000 Owner's Manual page 74

74
Chapter 6—Input Channels
2 Move the cursor to the desired button in the Channel Pairing window, then
press [ENTER].
The following buttons are available in this window:
• CANCEL
Cancels the operation.
• CH x ➔ y
Copies the odd channel parameter values to the even channel.
• CH y ➔ x
Copies the even channel parameter values to the odd channel.
• RESET BOTH
Resets both channel parameters to the default settings (same as when Channel memory #01
is recalled).
Move the cursor to the desired button, then press [ENTER] to confirm the pair.
Tip: Pressing and holding down the first [SEL] button of the paired channels and pressing
the second [SEL] button cancels the pair.
■ Pairing Input Channels Using the Display
1 Press the [PAIR/GROUP] button repeatedly until the Pair/Grup | Input page
appears.
The parameters on this page are described below:
A
PAIR MODE
Determines how channels are paired.
B
STEREO/MONO x2 buttons
These buttons turn pairs on or off.
C
MS buttons
These buttons are available when an MS microphone is connected. MS Decoding can be
used to decode signals from MS microphones arranged as MS pairs. (See page 77 for
more information on MS Decoding.)
DM1000—Owner's Manual
2
3
1