Setup; Fader Delay; Input Meter Point; Output Meter Point - Yamaha CL3 User Manual

Yamaha Commercial Audio

8.0 SETUP

Press the [SETUP] button in the upper left area of the Mixer window to open a
new window which allows user preferences to be selected.
iPad Status Bar
The iPad's Status Bar is visible in this screen, allowing the Wi-Fi signal
strength and the battery charge status to be viewed.
Press [Done] in the top-right corner to return to the Mixer window.
8.1

Fader Delay

This is a safety function to avoid accidental fader movements. The
value set here is the time needed to wait between touching a fader and
being able to move it.
8.2

Input Meter Point

Metering for Input Channels in StageMix can be taken from one of three
points in the signal path:
 Pre HPF
 Pre Fader
 Post On
8.3

Output Meter Point

Metering for Output Channels in StageMix can be taken from one of
three points in the signal path:
 Pre EQ
 Pre Fader
 Post On
CL StageMix V3.0 User Guide
Page 33