❏ Mixer Setup
To open the Mixer Setup dialogbox, choose [Mixer Setup] from the [File] menu.
A
Mix Bus Setup
Here you can make settings relating to the MIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX
buses.
Bus Type/Send Point:
cent odd-numbered/even-numbered MIX buses.
Pan Link:
The PAN setting for signals sent to stereo MIX buses will link to the PAN setting for the STEREO bus.
This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.
B
Matrix Bus Setup
Here you can make settings relating to the MATRIX buses.
Signal Type:
Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered
MATRIX buses.
Send Point for Input Channels:
bered/even-numbered MATRIX buses.
Pan Link:
The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO
bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.
1
2
Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adja-
Choose either PRE FADER or PRE EQ for each two adjacent odd-num-
4
M7CL V3 Editor Owner's Manual